Where can I find 6mA residual current declarations of GoodWe single phase and three phase inverters for Holland?
I have 10kWh batteries installed. So what if we have no electricity from our supplier, battery will be used to 0% during night. Is it possible to start it the next day when the sun starts shining and when the battery is empty? Will it start automaticaly when the battery is totaly empty but the sun is shining?
I'm sorry it is impossible to support one phase of back-up loads over 3.3kW.
Hi, another question from you! GW10K-ET can start from PV and battery, not 'or'. It's impossible to start only from PV. If there is no grid, ET will star from PV and batteries. If there is neither PV or grid, you can set 'cold start' from PV master to start ET.
I'm sorry about it. Could you tell me the decibels? I would like to check if it is normal with the inverter.
I'm sorry maybe you need to provide SN to the local after-service. It's difficult to explain the problem just by looking at the screenshot.
Sign up now for the GoodWe Solar Academy newsletter
(Please switch to "SEMS" and login if you have a SEMS account.)
(You can login to the community directly with your SEMS account.)
Congratulations, You have successfully reset your password!