GoodWe Third-Generation Data Logger-EzLogger3000C Introduction

GoodWe Third-Generation Data Logger-EzLogger3000C Introduction

Author: Malik

2024-11-06 10:50

 

With the rapid development of smart grids, GoodWe provides the more powerful third-generationC&Ismart data logger EzLogger3000C to meet the technical requirements of different markets worldwide. This device can easily handle data acquisition, transmission, and communication protocol conversion, seamlessly connecting to cloud services. It enables real-time monitoring, remote control, and efficient power dispatching of power plants.

 

Part 1:Introduction

The EzLogger3000C is designed for PV system monitoring and management platforms. It collects data from inverters, environmental monitoring instruments, smart meters, and other sources. Collected data is transmitted to either GoodWe SEMS Cloud or a third-party cloud platform for system monitoring, operation, and maintenance. Below is a simplified diagram illustrating the EzLogger3000CinthePVsystem:

 

Fig 1 EzLogger3000C Appearance and System Overview

 

Note:

1. Each RS-485 port can connect up to 20 inverters, and with 4 available ports, a total of 80 inverters can be connected if no other devices occupy the ports. In addition, the maximum number of devices that can be connected to other types of ports is 20. In total, a maximum of 100 devices can be connected.

2. 4G is an optional feature and only supports connection to SEMS.

3. The following interface and features may be adjusted without prior notice; please refer to the actual version for confirmation.

 

Part 2:New Features

1.Embedded WEB

The EzLogger3000C has a built-in web interface, so users don’t need to download software—they can configure data collection via Ethernet or Hotspot. Upon first accessing the webpage, users are guided through setup for quick device integration. The homepage includes monitoring windows for viewing system power, energy generation, and device connections.

 

There are two methods to access into the EzLogger3000C embedded web:

Method 1

1. Connect an Ethernet cable from the EzLogger3000C’s EHT2 port to the PC.

2. Set the PC’s IP address to match the Ezlogger3000’s network segment (e.g., if the Ezlogger3000C’sIP is 172.18.0.12, set your PC’s IP to 172.18.0.X, where X ≠ 12).

3. Open a browser and enter the Ezlogger3000C’s IP address (https://172.18.0.12:443) to access the web interface.

 

Method 2

1. Open Wi-Fi settings on your PC and find the hotspot named ‘Log-xxxxxxxx’ (where xxxxxxxx is the serial number of the Ezlogger3000C).

2. Connect to this hotspot using the initial password: 12345678.

3. Open a web browser and enter the fixed IP address and port number (https://172.18.0.12:443) to access the web interface.

 

For more details, pls download the file below. 

Download

Make an Appointment

Name:
Email:
Company:
Title:
Region:
Company Type:
Type of products:
On-Grid
Energy Storage
Project Type:
Your Needs:
User feedback

Dear User,
Thank you for visiting our community. We would love to hear about your opinion - simply fill out and hit confirm. Thank you for your feedback!

1.Please leave your valuable suggestions and feedbacks (0/9)
2.Please leave your contact information